HomeSkin BoosterSymphony Custom Booster
Skin Booster

Symphony Custom Booster

Not one product. A combination mixed for the skin in front of us.

Most clinics sell you a named booster. A Symphony Custom Booster session starts from your skin on the day — what it is short of, what it cannot tolerate — and the materials, the concentration and the route into the skin are chosen from there.

Treatment time10–20 min per session
AnaesthesiaTopical cream, or sedation-assisted comfort
DowntimeSame-day return
IntervalEvery 3–4 weeks

※ The final plan and cost are confirmed by your physician after an in-person examination at the clinic. Results and recovery vary by individual.

Symphony Custom Booster

Why the same treatment gives different results

Two people can be given the identical booster on the same afternoon and walk out with different outcomes. Skin thickness differs. Sebum, hydration and pore condition differ. What each person had done in the previous six months differs. The material is a constant; the skin is not.

So we do not begin from a product name. We begin from a reading of your skin, and then decide which materials go in, at what concentration, in what order and through which delivery route. Pure ingredients are used at full concentration rather than diluted, and the delivery route is matched to the material — a booster that suits a needle-free jet is not necessarily one that should be placed by hand.

How a session is put together

Four decisions, all of them made before the first drop goes in.

  1. 01Skin is measuredFace, neck and lines are assessed with our skin analysis system so the conversation starts from readings — moisture, pores, surface condition — rather than impressions.
  2. 02Materials are selectedThe physician chooses from the materials below according to what your skin is short of, and what it has recently been through.
  3. 03Concentration and order are setHow much of each, and in what sequence. Ingredients are used at full concentration rather than diluted down to fill a syringe.
  4. 04Delivery route is chosenNeedle-free jet, automated injector, multi-needle injector or hand injection — matched to the material, the area and how you tolerate injection.

Four things we hold to

It starts with measurement
A booster session that begins with a product name has skipped the part that decides the outcome.
Full-strength ingredients
Pure, high-concentration material goes in as it is, without being diluted.
A set penetration protocol
Depth and delivery follow a defined protocol so the material reaches the layer it is intended for, evenly across the area.
Comfort planned in advance
Topical anaesthetic and an inhaled comfort option, chosen before the session rather than negotiated during it.

What can go into the mix

Rejuran HealerPolynucleotide (PN). Promotes regeneration of collagen in skin damaged by ageing and repeated irritation.
Juvelook / Juvelook VolumeHigh-molecular PLA combined with hyaluronic acid — a collagen booster working through your own tissue.
Exosome / LimelightStem cell conditioned media. Supports cell vitality, induces regeneration and helps restore the skin barrier.
UltracolPDO microparticles that induce your own collagen production for natural volume.
Laetigen99.9% pure type 1 collagen placed directly into the dermis.
JaluproConcentrated pure amino acids with hyaluronic acid, supplying nutrients directly to skin cells.
Fillmed NCTF53 compounded ingredients with hyaluronic acid — hydration, glow, tone and firmness.
Collaum 120 / 240PLLA microspheres placed in the dermis to stimulate your own collagen where volume has been lost.
RadiesseA mineral-based material addressing the ECM, the core of skin ageing.
GlieboGlyceollin, a plant-derived compound that inhibits melanin synthesis, used for brightening.
Skin botoxBotulinum toxin placed in the dermis rather than muscle — sebum reduction, pore tightening, fine lines.
Glow fillerHyaluronic acid acting as a water magnet for tone, hydration and fine lines.
V-OletAn injectable approved by Korea's MFDS for submental fat, working on the fat cell membrane.

Combinations we commonly build

Real examples of how materials are paired by concern. Yours is decided at consultation, not from this list.

20s — dryness, pores
Rejuran for regeneration and hydration, with Juvelook for pores and firmness.
30s — dryness, fine lines
Delivered by Mirajet, combining Rejuran for regeneration and hydration with Juvelook for pores and moisture.
40s — redness, breakouts, pores
Mirajet delivery with Juvelook for firmness and hydration, Exosome for breakouts and pores, and glow filler for radiance.
50s — firmness, pores, pigmentation
Mirajet delivery with Juvelook for firmness and hydration, Gliebo for brightening and Fillmed for hydration and glow.

Four ways the material reaches your skin

The route is part of the plan, not an afterthought. It changes comfort, evenness and how much of the dose actually arrives.

Mirajet — needle-free
A micro-jet delivers the material without a needle: no needle pain, no thermal injury, no raised bumps to wait out. Nothing is left in the syringe, so the full dose reaches the skin — which is why several synergistic materials can be given together in one short session.
I-JECT — automated injection
Digital delivery at a constant speed, which reduces discomfort and evens out the amount placed. Well suited to repeat courses such as boosters and collagen injections.
Multi-needle injector
Nine 34G needles place material at one set depth across a wide area, more evenly than by hand, with depth chosen for skin thickness — around half the discomfort of hand injection. Bumps are uniform and typically absorb within about a day.
Hand injection
Still the right answer in some areas, and wholly dependent on the hand doing it. Our physicians work with over 20 years of clinical practice to keep discomfort and bruising down.

What you are actually buying

The materials are available in many clinics. The structure around them is what you are choosing between.

The doctor mixes and performs
The person who decides the combination is the person who carries out the treatment. Nothing is handed over after the consultation.
Told what is going in
You are told which materials are being used and why, before the session begins — not given a package name.
Skincare before and after
Medical skincare before the session clears the surface so material is absorbed evenly, and after it supports recovery.
A plan for after you fly
Interval, home care and what to avoid are written out before you leave Korea, and you can reach us once you are home.

Questions we are asked most

How is this different from just booking a named booster?

A named booster fixes the material before anyone has looked at your skin. Here the material, the concentration and the delivery route are all decided after your skin is measured — so two patients booking the same session rarely receive the same mix.

How many materials are usually combined?

It depends entirely on the skin. Needle-free Mirajet delivery makes it practical to place several complementary materials in one short session, which is often how we work — but more is not automatically better, and combinations are kept to what your skin can benefit from.

Can I fly home the same day?

Yes. A session takes 10 to 20 minutes and you return to normal activity straight away. With needle delivery, small uniform bumps are normal and usually absorb within about a day; with Mirajet there are none.

I only have a few days in Seoul. Is a course still worth starting?

Often, yes — but we plan around the dates you actually have. At consultation we set out what is best done on this visit, what suits a later one, and what you can maintain at home in between.

Will you tell me the price of each material?

Yes. The combination is explained item by item at consultation, with the cost of each, before anything is agreed. Overseas patient pricing is confirmed in writing before treatment.

What we look at before anything is switched on

01
Skin analysis first
Skin type, thickness and condition are assessed before settings are chosen, so energy levels and tips match the skin in front of us rather than a default protocol.
02
Planned and performed by a physician
The doctor who consults you draws up the plan and carries it out. Nothing is delegated after the consultation.
03
Layered, not single-device
Treatments are combined by depth and symptom, with intervals planned around your recovery.
04
Care that continues
Conditioning before, calming immediately after, and home-care guidance through recovery — then the next session is adjusted to how your skin responded.
BEFORE & AFTER

Records from our own treatment rooms

More
MIRAJET + Juvelook
MIRAJET + Juvelook
Filmed by the people who came
Creators and guests from Taiwan, Japan and China
Guest films

You have read this far. Start with one photo.

Free, one-on-one, and nothing is decided until you see the plan in person.

Ask on WhatsAppLINE ID@871hygrh
LINE ID @871hygrh
On a laptop? Scan this with your phone.
Ask first — it's free.
Not sure where to start? Ask first.
Free · A photo is enough · One-on-one on WhatsApp
BookWhatsApp Consultation